Special

Next >>


FM15XX> separate PCB for the existing doorloops


FM15XX> separate PCB for the existing doorloops


12 amps continuous up to 4 pin 3 x 4 =12 fixed screw clamps and 2 x 6 = 12 removable clamps

Article code: FM15xx



This PCB can be used to mount on a existing door loop or for replacement. The gray holder is provided with tape so that it can be pasted on any surface. The PCB can process up to 48 V DC with a continuous amperage of 4 Amp. The screw terminals are numbered as well as the print. Optionally, one of the removable plugs can be equipped with a pin so that it fits only in one way. All current E-lock locks can be applied to the FM15XX and they are developed for i.a. the Fuhr multipointlock engine. The width of the PCB holder is 1 mm narrower than the door loop so it will always fit. You should also have a look at the cover FM1704 for this PCB. This cover ensures that there are no chip or sharps in or between the PCB and the wiring, eg. for use in aluminum or plastic doors.




29.50  € 28.00 Prices are excluding VAT


Discount scheme:
1 = € 28.00
2 = € 28.50
5 = € 27.00
10 = € 25.50
50 = € 24.00
100 = € 22.50



limited supply


Quantity